m0n0wall and cisco vlan howto for asterisk voip

Setting up Vlans on your Cisco Switch with Monowall Requirements: Cisco 2950 Soekris or similar w/ m0n0wall Network Diagram: Network Hardware Picture: The Howto First, we telnet to the switch and perform the following: cisco1>enable Password: cisco1#conf t Enter configuration commands, one per line. End with CNTL/Z. cisco1(config)#int vlan10 Now we can configure our first vlan, in this case vlan10. Now, since we’re doing the phones vlan, we’ll give it a description...

April 15, 2007 · 8 min · 1538 words · Matt G